KGA163C Smart High-Speed Sectional Warping Machine

Main Features Of KGA163C Smart-High-Speed Sectional Warping Machine

This machine is suitable for sectional warping of all types of yarns,including worsted fabric, synthetic filament fabric, yarn-dyed fabric,real silk fabric, and special textiles etc. It can be used as the pre-weaving preparation equipment for shuttleless loom of rapier,projectile, water-jet and air-jet etc., it is the preferential
equipment of weaving mill for developing various top-grade fabrics or special-type fabrics. It can meet the sectional warping of various top-grade fabrics, precision fabrics and heavy tension fabrics.

• Warping and beaming is driven by A.C frequency converter so that constant yarn speed and tension is gained even at high speed.

• The special machinery-electricity-gas integrated pressure equipment can create oil pressure and drive the clamping brake to realize the controlling of warp brake. The proportioning valve controls the damping mode of the outer steel node and realizes the automatic control of the beam tension.

• Warp servo transmission uses the ball bearing lead screw structure and has the characteristic of rapid response and high precision. Bar position setting and initial, potential adjustment will complete automatically once button pressing.

• The forward and backward movement of the warping table is controlled by an AC digital servo controller and transmission of the ball screw rod. The system is also equipped with press rollers and several kinds of sensors.

• The application of press rollers guarantees the greater flatness of the thread. The warping table will return for the same distance in the warping procedure.

• Servo motor will measure the thickness of the warp thread for several times through the transmission of the ball bearing lead screw and realize the automatic measurement of the warping displacement (patent technology).

• The steel drum is subject to high precision dynamic balance calibration.

• Use of communication technology, machinery-electricity-liquid-gas integrated design. Configure multiple PLCs, digital A.C. servo frequency inverters, two touch screens, and one long-distance monitor. The system is advanced, reliable, and highly automated.

• The warping frame is moved on the rail, but the lease reed and creel are fixed so that the position of warp stripe is unchanged and the side yarn tension is also constant.

• The movable beaming part can match one or more warping machines. The electrical source and air supply are connected by the inserter, simple and reliable. In case of a unit, it could be securely installed.

• Various types of bobbin creels are available, and the spindle pitch and spindle number could be selected according to the customer’s request.

• Several types of tension devices and warp stop motions are available.

• A static eliminator is provided in the warping table, and oiling equipment is provided in the beaming part.

   

  

  Beaming touching display screen

  

  Touching display screen

  

  Electrical control system for warping